User login

To prevent automated spam submissions leave this field empty.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
1 + 0 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

Single-Functional

Temperature Sensor 20'

Measures: 
Temperature in air, water and soil

Measure temperature in air, water, or soil with the 6.1m (20 ft) TMC20-HD temperature sensor. This product is designed to be used with HOBO U-Series, UX120-006M external-channel data loggers or ZW series wireless datanodes. This sensor records temperatures between -40° and 50°C (-40° to 122°F) in water or soil, and between -40° and 100°C (-40° to 212°F) in air. This product provides a response time of minutes typical to 90% in air moving 1 m/sec (2.2 mph); and 1 minute typical to 90% response time in stirred water.

Sensor Range (Accuracy): 
-40° to 50°C (-40° to 122°F) in water; -40° to 100°C (-40° to 212°F) in air w/U12: ±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F), insert probe 2.3 cm (0.9 inches) minimum; w/ZW: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), insert probe 2.3 cm (0.9 inches) minimum; w/UX120-006M: ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F), insert probe 2.3 cm (0.9 inches) minimum;
Compatible Tools: 
HOBO U12-012 HOBO UX120-006M
Sub-Category: 

Temperature/RH Smart Sensor

Measures: 
Temperature, Relative Humidity

The 12-bit Temperature/RH Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.

Environment:
The S-THB-M008 Sensor is for use in Indoor and Outdoor environments

Measurements:
The S-THB-M008 Sensor supports the following measurements:
Temperature, Relative Humidity

Sub-Category: 

Dent MAGlogger

Measures: 
monitoring electric motors, appliances, computers, or any device generating a magnetic field

The MAGlogger , Model TOU-M, for monitoring electric motors, appliances, computers, or any device generating a magnetic field. TOU SMARTloggers are single channel, on-off status data loggers. They are designed to provide Total On-Time and Time-Of-Use (TOU) information about energy consuming devices with a constant power draw as well as the operating schedule for any device. The TOUs record the time to the second that a device turns on, and then again when it turns off. The data saved to the logger’s memory is a series of on-off transitions and time stamps.

Sub-Category: 

Dent CONTACTlogger

Measures: 
Operating Schedule

The CONTACTlogger™, Model TOU-C, for monitoring relay closures, switches, and digital on/off signals. TOU SMARTloggers are single channel, on-off status data loggers. They are designed to provide Total On-Time and Time-Of-Use (TOU) information about energy consuming devices with a constant power draw as well as the operating schedule for any device. The TOUs record the time to the second that a device turns on, and then again when it turns off. The data saved to the logger’s memory is a series of on-off transitions and time stamps.

Sub-Category: 

HOBO Temperature Sensor

Measures: 
Temperature in air, water and soil

A temperature sensor for use with HOBO U-Series external-channel data loggers, this model measures temperature in air, water, or soil. Accuracy and resolution vary according with attached logger model. Measurement range is -40° to 50°C (-40° to 122°F) in water or soil, -40° to 100°C (-40° to 212°F) in air; response time is minutes typical to 90% in air moving 1 m/sec (2.2 mph); response time in stirred water is 1 minute typical to 90%.

Sub-Category: 

Pulse Input Adapters

Measures: 
Volts | Switch Closures per interval

The Pulse Input Adapters are used to log the number of switch closures per interval and are designed to work with the HOBO Weather Station and Micro Station data loggers. The adapter has a plug-in modular connectore that allows it to be added easily to the Weather Station or Micro Station. Two versions are available for easy interfacing with either mechanical contact closures or solid-state electronic switches. The contact closure version is ideal for connecting to tipping bucket rain gauges.

Sub-Category: